Space weather center in Japan

Progress in information technology has enabled to collecting data in near real-time. This significantly improves our ability to monitor space weather conditions. We deliver information on near real-time space weather conditions via the internet. We have started two collaborations with space weather users. One is a measurement of geomagnetically induced current (GIC) of power grids in collaboration with a Japanese power company. The other concerns radiation hazards for aircrews. The radiation exposure level for aircrews was been determined by the Japanese government by the end of 2005. The proposed upper limit is 5 mSV a year. We are actively seeking ways to contribute to this subject. Our activities at the Japanese space weather center are reported in this paper.     

US-allied participation in the SDI research programme

Senator Lugar argues that a better European appreciation of the SDI is essential to try to define the roles of the US allies in the programme. A number of guidelines for allied participation should be applied, covering mode of participation, areas for participation, responsibilities under treaty provisions, technology transfer and security safeguards. Bilateral agreements are viewed as the mode for proceeding, but it is incumbent on the US government to outline the next steps it evisages to come to grips with the political considerations that will influence allied calculations on whether and under what circumstances to participate in SDI research.     

EXOSAT medium energy observations of Cyg X-2

On July 5.–6. 1983, during the EXOSAT performance verification (PV) and calibration phase, a raster scan of Cygnus X-2 was performed. In contrast to the previously observed smooth intensity variations on timescales of hours, the source revealed a behaviour unknown until now: active periods with high energy flares recurring on time scales of 300–500 s were interrupted by quiet periods of several hours. At all intensity levels the source spectra clearly require a two component continuum (blackbody + thermal bremsstrahlung). In addition, a weak iron emission line with equivalent widths between 39 an 70 eV was detected. The source has a much harder spectrum during the flares than during quiet periods, indicating drastic temperature changes within the emission region, while the absolute iron line flux does not vary. From the spectral characteristics it becomes clear that self-comptonization of the thermal bremsstrahlung spectrum plays an important role. The time variability and spectral behaviour in this peculiar state allow Cyg X-2 to be classified as a Low Mass X-ray Binary System (LMXB) very similar to the prototype of this class, Sco X-1.     

An empirical model of electron density for low and middle latitudes below 200 km

Our empirical model of electron density (n_e) for quiet and weakly disturbed geomagnetic conditions (Kp not greater 4) takes account of comparative analysis of existing models and of experimental data obtained by rockets and incoherent scatter radar. The model describes the n_e distribution in the 80 to 200 km height range at low and middle latitudes, and to some extent, in the subauroral region. It is presented in analytical form thus allowing one to calculate electron density profiles for any time. The electron density distribution at 140 km depends on the season (day of the year) and on the solar zenith angle. Profile variations during the day are for one season shown. Different from other models, ours specifies the variations during sunrise and sunset and reflects the particular profile shape at night admitting the occurrence of an intermediate layer.     

Error Covariance Analysis of a Karhunen-Loeve Random Field Estimator

An error covariance analysis of a two-dimensional Karhunen-Loeve random field estimator (KLE) for gridded gravity data is presented without actually using the data. Attention is focused particularly on the north-south deflection component of the disturbance vector so that the rms value of its residual error may not exceed 3 percent of the signal rms for grid spacing of not less than 5 nm, when signal-to-noise ratio in the data is varied within reasonable limits. To achieve this rather stringent goal, a discrete KLE derived entirely from a two-dimensional grid configuration is needed. The KLE for geodesy applications was developed initially by Bose. Using continuous measurements and the orthogonality relations of the Karhunen-Loeve (KL) eigenvectors in a continuous domain, continuous KL gain coefficients ?mnj and consequently the continuous KL gain vector Kmn were obtained; thus a satisfactory continuous KLE was achieved. However the discrete version of the KLE was then given by keeping the old (continuous) ?mnj, and simply computing the KL eigenvectors on the grid coordinates to evaluate the discrete KL gain vector Kmn. Clearly this is not a satisfactory discrete KLE since , ?mnj are not constants but rather depend on the measurement noise variances. So if the measurements are now going to be discrete, one must rederive ?mnj for this situation.     

Utility of proposed sensors for coastal engineering studies

The needs of coastal engineering are different from open ocean monitoring or fisheries potential monitoring. A high resolution of 20 meters is essential for identifying several processes that are taking place and influences the coast. A case of application of Landsat MSS to evaluate littoral process highlights the needs for improved spatial resolution. Nevertheless Landsat MSS data for 1981 and 1982 showed that the extent of accretion and erosion that has taken place during this period. Some problems to be addressed for marine remote sensing are mainly regarding the need for insitu data. These aspects are mentioned.     

Order of magnitude analysis of convective effects in dendritic solidification

The different types of convective phenomena which may occur during the dendritic solidification of metallic alloys are discussed from an order of magnitude analysis. Bulk thermal convection and/or interdendritic solutal convection have to be considered according to the values of the experimental data. Scaling laws for the solute boundary layer resulting from bulk thermal convection have already been derived. It is shown here that the interdendritic flow depends on a solutal Grashof number Gr based on the horizontal density gradient and a characteristic length L_s which is of the order of the liquid channels width. For Gr < 1, which is generally verified in practical cases, the interdendritic flow velocity U_r is proportional to the Grashof number. This a priori law compares favorably with the results of horizontal solidification experiments where the mean interdendritic flow velocity has been estimated from the resulting measured macrosegregation. In these experiments, as well as for most horizontal dendritic solidifications of metallic alloys at 1 g, the ratio $\text{U}{}_{\mathrm{r}}\text{R}$ (R is the growth rate) is of order one. In order to cancel the interdendritic flow effects, this ratio has to be lowered by one order of magnitude. According to our analysis, this can be obtained by performing the experiments either at a slightly reduced g level (～10^?1 g), or at 1 g in a vertical stable configuration with a sufficiently low residual horizontal thermal gradient.     

Fundamentals of plasma simulation

With the increasing size and speed of modern supercomputers, the incredibly complex nonlinear properties of plasmas in the laboratory and in space are being successfully explored in increasing depth. Of particular importance have been numerical simulation techniques involving finite size particles on a discrete mesh. After discussing the importance of this means of understanding a variety of nonlinear plasma phenomena, we describe the basic elements of particle-in-cell simulation and their limitations and advantages. The differencing techniques, stability and accuracy issues, data management and optimization issues are discussed by a simple example of a particle-in-cell code. Recent advances in simulation methods allowing large space and time scales to be treated with minimal sacrifice in physics are reviewed. Various examples of nonlinear processes successfully studied by plasma simulation are given.     

Methods for rotor aerodynamic and dynamic analysis

The complex problems associated with the aerodynamics of blade/vortex interactions, the dynamics of a blade displaced out of its plane of rotation, and the position control of a hovering helicopter are discussed. Simplified models help to describe, and appear to be adequate for analysing, many aspects of these problems. Free wake analyses are shown to be of importance in determining blade loads and performance for hovering flight or for wind turbines. Unsteady aerodynamics and careful definition of the wake formation are required when computing vibratory airloads in forward flight.     

The interest of information obtained by incoherent scatter technique

Incoherent scatter measurements are of great value for establishing and improving the IRI. This holds, in particular, for the topside electron density profile, for the valley occurring under certain conditions between regions E and F, and for the electron and ion temperature profiles. Extension in time of the observations could be very helpful for future work on IRI.